LF: Mount/Brackets for 96 Civic Sedan - B20 install

[RudyG]

I gather I only need the following as the others can be reused.

Rear trans mount - 99-00 SIR: 50827-S04-N10
Driver side mount bracket - 99-00 SIR: 11910-P30-000
A/C bracket - del Sol VTEC: 38930-P54-000

Do i really need the del Sol bracket or will the b20 one be fine to use with a d-series compressor?

Just wondering if anyone has these before I order them from Honda?

Thanks.

[Solid Alibye]

Hey Rudy!

You do **NOT** need an EK SiR driver's mount bracket for the B20. The B20 one is IDENTICAL to the EK SiR one. Re-use your stock driver's upper mount and you're good! Otherwise you'll need:

- tranny side upper mount: re-use your stock mount + bracket

- tranny rear **must be EK SiR bracket** + stock rubber mount (like you posted)

- A/C bracket yes del sol VTEC will 100% work **BUT** don't buy one yet. If you get a JDM B20B (low intake manifold version) and the A/C bracket may fit. The one that came with my JDM B20B worked on my EG 4-hore (a/c compressor mounted perfect) and on a friend's 99-00 EK 4-door the JDM B20B A/C bracket work as well and his a/c compressor also bolted on perfect. So if you get a JDM B20B try the one it comes with first

- tranny side low (torque mount) any 5-speed B-series (94-01 Teg, or 99-00 SiR)

*but* you have to re-use your stock rubber mounts for the tranny side lower bracket and on the a/c bracket.

:)

Enjoy the torque! $400 JDM B20's rock! :D

[RudyG]

Thanks for the info Ken! Cant wait to get this all sorted. :D