TAO
10-16-2011, 03:44 PM
"Maximum" MAstercraft "Canadian Tire" 1/2" 14.4V Impact Gun
1/2 Drive Impact Gun (Fits 1/2 drive sockets)
~90 ft/lbs of torque
14.4Volt NiCad
C/W
2 Batteries, Charger, Case and all accesories (1/4" adaptor, 3/8 drive adaptor and a bunch of bits (drill, and drive))
-Not enough Torque to break a lug nut free - but I typically used a breaker bar first
-Has enough torque to break free most other "regular" nuts/bolts on the car though.
-It is pretty compact and light - easy to manuver. I used this a fair bit when compressed air was not available
-Can be used to drive screws etc (to do decks etc) with the supplied 1/4 adaptor and drive bits
Gun is cosmetically a bit rough but works fine - Hey it has been bounced around a toolbox / trunk / garage for a few years
$50 OBO
contact me at moosilla1967*AT*gmail*dot*com
http://farm7.static.flickr.com/6160/6250782867_b9816db11c_z.jpg
http://farm7.static.flickr.com/6222/6250782069_c452e715de_z.jpg
1/2 Drive Impact Gun (Fits 1/2 drive sockets)
~90 ft/lbs of torque
14.4Volt NiCad
C/W
2 Batteries, Charger, Case and all accesories (1/4" adaptor, 3/8 drive adaptor and a bunch of bits (drill, and drive))
-Not enough Torque to break a lug nut free - but I typically used a breaker bar first
-Has enough torque to break free most other "regular" nuts/bolts on the car though.
-It is pretty compact and light - easy to manuver. I used this a fair bit when compressed air was not available
-Can be used to drive screws etc (to do decks etc) with the supplied 1/4 adaptor and drive bits
Gun is cosmetically a bit rough but works fine - Hey it has been bounced around a toolbox / trunk / garage for a few years
$50 OBO
contact me at moosilla1967*AT*gmail*dot*com
http://farm7.static.flickr.com/6160/6250782867_b9816db11c_z.jpg
http://farm7.static.flickr.com/6222/6250782069_c452e715de_z.jpg