PDA

View Full Version : Garage Sale


arapone
06-12-2008, 10:00 AM
I'm cleaning out the garage and have lots of goodies to sell. Its on ongoing list as I find more stuf.

Blind Apex DisplayIT In-Car Lap Timer. Works with all CASC-OR Timing. Will display Official AMB Laptimes, Gap with your best time, Current Overall Position, Gap with car ahead, Track time, Class position in qualifying and race sessions, and much more. I have 2 units brand new. Comes with Setup information and mounting bracket. Paid $299 US + $25 for the bracket plus shipping and duties. $150 each or $250 for the pair. Blind Apex (http://www.blindapex.com/products_displayit.html) IO Port Racing (where it was purchased originally) (http://www.ioportracing.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=AMB1)

B18C Built Engine. 208 WHP & 141 ft.lbs (Dyno Graph Available). Redline set to 8500 RPM. Built by Gord Bush & Turtle. Tuned/built for reliability rather than peak performance comes with chip. This motor took Rob to 1st at Toronto Indy and gave me 5 podium finishes (4 - 1st, 1 - 2nd). Used for 6 race weekends, excellent condition. $6500

JDM ITR Brake Booster. Make me an offer.

JDM ITR Stock Air Box. Make me an offer.

JDM ITR Stock Engine Mounts. Make me an offer.

Aluminum Portable Propane BBQ (Used 1 weekend) $20

Motive Brake Bleeder (Never Used) $35 - Pending Sale (Anna)

ATS Carbon LSD (Excellent condition. Used 1 weekend) $800 - Sold

ITR OEM Cam Gears $15

ITR Dual Valve Springs & Retainers (IN & EX) $50

SRR 4.9 FD (Purchased from Miles, Never Used) $300 - Pending Sale (Riding low)

ITR Replacement Upper A Arms with Ball Joint (From Napa) (L & R) $50

ITR Rotors purchased from TRAC $40 each (I beleve I have 6)

S2000 4.77 Final Drive (Brand New) $350

S2000 4.1 AP1 OEM FD (Used, excellent condition) $50 - Pending Sale

S2000 AP1 Diff, Comptech Reinforced Diff housing, J's Racing LSD, 4.57R FD $1200

S2000 TIR 60mm Titanium Exhaust $1000


Rims:
http://www.s2ki.com/forums/index.php?act=module&module=gallery&cmd=viewimage&img=541742

4 Racing Hart CP-035 15x7 5x114.3 Forged 9.4 Lbs each
No Rubber $700 Link (http://www.s2ki.com/forums/index.php?act=module&module=gallery&cmd=viewimage&img=541742)


http://www.s2ki.com/forums/index.php?act=module&module=gallery&cmd=viewimage&img=541739http://www.s2ki.com/forums/index.php?act=module&module=gallery&cmd=viewimage&img=541738

4 Cast with No Rubber $200 Link 1 (http://www.s2ki.com/forums/index.php?act=module&module=gallery&cmd=viewimage&img=541739) Link 2 (http://www.s2ki.com/forums/index.php?act=module&module=gallery&cmd=viewimage&img=541738)


http://www.s2ki.com/forums/index.php?act=module&module=gallery&cmd=viewimage&img=541741

6 Cast with No Rubber $300 Link (http://www.s2ki.com/forums/index.php?act=module&module=gallery&cmd=viewimage&img=541741)

AAC
06-12-2008, 10:54 AM
Are the rotors front or rear? I might be able to take at least 4 off your hands.

arapone
06-12-2008, 10:56 AM
I have to double check how many are front and rear. I'll let you know shortly .

Nova_Dust
06-12-2008, 12:03 PM
That 4.9FD is for a B transmission yes?

AAC
06-12-2008, 01:08 PM
Is the Motive bleeder the Import power bleeder model #0251?

If so I'll take it.

MilesM
06-12-2008, 01:10 PM
The 4.9 came off of an ITR. I never installed it either cause it didn't fit on my B-series cable tranny I was running at the time. You need a B-series hydro to run it.

Fly Baby Ride
06-12-2008, 02:25 PM
Am also interested in rotors. Let me know whatcha got Andre, thanks!

Nova_Dust
06-13-2008, 12:03 PM
The 4.9 came off of an ITR. I never installed it either cause it didn't fit on my B-series cable tranny I was running at the time. You need a B-series hydro to run it.

B hydro I have! mmm, need to give some thoughts on this upgrade.

eg6ajk
06-14-2008, 08:01 AM
B hydro I have! mmm, need to give some thoughts on this upgrade.

Negative.....you have 4.785 - spend your money wisely

arapone
06-16-2008, 07:53 AM
I am not 100% sure which model the motive brake bleeder is. I can't seem to find any part numbers on the unit so I will post up some photos and hopefully someone can figure out which model it is.

AAC
06-16-2008, 09:37 AM
Andre - any word on the rotors (F or R)? Also, are these Brembo blanks?

arapone
06-18-2008, 10:52 AM
parts updated

SIR-JP
06-21-2008, 07:03 PM
Is your FD still for sale? Is it for LSD tranny or none LSD :confused:

arapone
06-23-2008, 07:31 AM
The FD is pending a sale, and not sure if it is for LSD or NON LSD FD. Never tried to install it. Miles may be able to answer that since I bought it off of him originally.

arapone
06-24-2008, 01:04 PM
parts added.

ShaneG
06-24-2008, 01:49 PM
Hey Andre,
I am interested in 1

Blind Apex DisplayIT In-Car Lap Timer. Works with all CASC-OR Timing. Will display Official AMB Laptimes, Gap with your best time, Current Overall Position, Gap with car ahead, Track time, Class position in qualifying and race sessions, and much more. I have 2 units brand new. Comes with Setup information and mounting bracket. Paid $299 US + $25 for the bracket plus shipping and duties. $150 each

but need a little more info.
how does it pick up the lap times?
and specifically will it work at solosprint or does the track have to activate the beacon...or whatever it uses.

HBomb
06-24-2008, 02:07 PM
Andre,

Are those upper A-arms (NAPA style) new? I'm interested. LMK

Hanif

arapone
06-24-2008, 10:27 PM
Hanif, The Upper A-arms are the NAPA style. You have dibs.

Shane, it works with the AMB timing system. I am not 100% sure what system the Solosprint uses, but it may work.

MilesM
06-24-2008, 10:53 PM
Not sure there's a difference between LSD, or non-lsd FDs. Anyone know if you can put an ITR FD and LSD in a GSR or SIR? If quaife has different part numbers for GSR and SIR trannies than it would be definitely be a different ring gear since that's where the LSD bolts up to.

Like I said, it's from an ITR tranny which had an LSD. I paid 800 for it back in the day when FDs were selling for 1100. 300 is a steal.

MilesM
06-24-2008, 11:02 PM
I just looked up the parts number for quaifes and seems GS/LS, SIR and GS-R 92-93 have different part numbers - smaller Honda LSD. While Integra GSR 94-00 and ITR have the same part number. So based on that reasoning, I believe the SRR 4.9FD should work on ITR trannies and 1994+ (B18C - not B17 motored) GSRs.

Quaife Part Numbers:
Integra GS/LS 1990-2000
Integra GS-R 1992-93
Civic Si 1999-2002 VTEC dohc (B16)
60.309.160

Integra GS-R 1994-2000
Integra Type R 1998-2001
60.309.180

arapone
06-25-2008, 06:52 AM
Thanks Miles !